Go-Keto Glucose Teststrips (x50)

Go-Keto Glucose Teststrips for Go-Keto meter (x50)

Fast and reliable results to test blood with very high (70%) and very low (20%) hematocrit levels including neonatal and anemic blood.

The most affordable glucose meter with extra wide HCT range:

✅ 50 glucose test strips
✅ For use in the Go-Keto^® and the OnCall^® GK Dual meter (sold seperately)
✅ CE marked glucose test strips for highly accurate blood glucose monitoring
✅ Just 5 seconds and only 0.8 µL blood sample
✅ Wide HCT range of 20-70%
✅ Easy to use
✅ Accurate results that comply with ISO15197 2015

Specifications:

Enhanced Accuracy with Hematocrit Auto-correction Technology

• Advanced HCT auto-correction technology, which allows it to be able to test blood with very high (70%) and very low (20%) hematocrit levels including neonatal blood* and anemic blood*.
• GOD enzyme technology with no interference from Icodextrin, Maltose, or Galactose
• Only 0.8 µL sample
• HCT range of 20-70%
• Measurement Range 10 – 600 mg/dL (0.6 – 33.3 mmol/L)
• Test strip shelf life up to 24 months*; Open canister shelf life of 6 months.
• Code chip for auto calibration
• Extensive clinical studies prove the accuracy of Go-Keto® Blood Glucose Monitoring System with fresh capillary blood and neonatal blood.

Important:

We guarantee a minimum shelf life on all teststrips of 6 months

Why is the SwissPointOfCare Go-Keto meter a good choice.

The Go-Keto^® glucose and ketone meter uses the latest technology and GOD Enzyme, which  is more safe and has zero interference from maltose, galactose and Xylose.

Note: The GDH-PQQ enzyme used by some glucose meters is not glucose-specific and reacts with other sugars such as maltose, galactose and xylose, which can lead to possible falsely elevated blood glucose levels.

Instructions for use:

See your User’s Manual for complete instructions. Watch our instructional videos on YouTube and on our website to optimize your testing results,

Preparation: Before you start make sure you have the following:

• Go-Keto^® glucose ketone meter
• Lancing pen and lancets
• Go-Keto glucose teststrip

Doing a test:

1. Make sure the code chip is inserted in the meter.
2. Turn on the meter by inserting a test strip. Wait for the blood symbol to blink
3. Apply a blood sample and obtain results in just 5 seconds

If you need further help, you can contact us and we gladly walk you through. We offer full documentation, including manuals, quickstart guide, video’s etc. Complementary user training and support in 5 languages (UK, DE, FR, ES; NL).

Specifications:

The Go-Keto^® Test Strips are thin strips. The strips have a chemical reagent system. They are for work with the Go-Keto^® blood glucose and ketone meter and OnCall^® GK Dual Blood Glucose & Ketone Meter to measure the glucose concentration in whole blood. Blood is applied to the end tip of the test strip. Then the blood is automatically absorbed into the reaction cell. This is where the reaction takes place. A transient electrical current is formed during the reaction. The blood glucose concentration is calculated based on the electrical current detected by the meter. The result is shown on the meter display. The meters are calibrated to show plasma equivalent results.

Go-Keto^® Test Strips are used by people with diabetes at home and by healthcare professionals. They are used to measure glucose in capillary whole blood from the finger, forearm, and palm. The system is also used to monitor how well the diabetes control programs work.

Each test strip has reactive and non-reactive chemicals. These chemicals are: Glucose Oxidase < 25 IU, Mediator < 300 μg, Buffer, and Non-reactive Ingredient.

Each test strip vial has a drying agent.